BHWMN - 53780910 PREREACTED URETHANE (MINT GRAY)

  • MSDS: BHWMN
  • Manufacturer: KOP COAT INC
  • Product Name: 53780910 PREREACTED URETHANE (MINT GRAY)
  • National Stock Number: 8010-01-137-8000
Product Identification

Product ID:53780910 PREREACTED URETHANE (MINT GRAY)
MSDS Date:10/01/1988
FSC:8010
NIIN:01-137-8000
MSDS Number: BHWMN

Responsible Party
KOP-COAT INC
436 7TH AVENUE
PITTSBURGH, PA 15219-1818
US

Emergency Phone: 800-548-0489 OR 412-227-2700

Info Phone: 800-547-2468

Cage: 00297

Contractor
KOP-COAT INC
PITTSBURGH, PA 15219-1818 US

Telephone: 800-553-5631, CHEMTREC 800-424-9300

Cage: 00297

Ingredients

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 15-20%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 15-20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 5-10%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192


N-BUTYL ACETATE (SARA III)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 1-5%

OSHA PEL 150 PPM/200 STEL

ACGIH TLV: 150 PPM/200STEL;9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


METHYL ISOBUTYL KETONE (SARA III)

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 15-20%

OSHA PEL 100 PPM/75 STEL

ACGIH TLV: 50 PPM/75 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


SILICONE DIOXIDE

CAS: 68855-54-9

Fraction By Weight: 1-5%

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: IRRITATION OF THE
RESPIRATORY TRACT AND ACUTE NERVOUS SYSTEM DEPRESSION. SKIN & EYE
CONTACT: PRIMARY IRRITATION. CHRONIC: REPEATED OR PROLONGED
OVEREXPOSURE MAY CAUSE DEFATTING OF T HE SKIN.
Explanation of Carcinogenicity:NONE OF THE COMPOUNDS IN THIS PRODUCT IS
LISTED BY IARC, NTP, OR OSHA AS A CARCINOGEN.
Effects of Overexposure:INHALATION: HEADACHE, WEAKNESS, DIZZINESS,
INCOORDINATION AND POSSIBLE UNCONSCIOUSNESS OR COMA. CONTACT:
REDNESS, CRACKING, BLISTERING, IRRITATION AND DERMATITIS.
INGESTION:MAY CAUSE NAUSEA, VOMITING, AND DIARRHEA. ASPIRATION OF
PRODUCT INTO THE LUNG MAY CAUSE CHEMICAL PNEUMONITIS WHICH CAN BE
FATAL.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING DISEASE
IN OR A HISTORY OF AILMENTS INVOLVING THE SKIN, EYE, RESPIRATORY
TRACT, LIVER, KIDNEY, OR CNS ARE AT GREATER RISK OF DEVELOPING
ADVERSE EFFECTS WHEN EXPOSED.

First Aid

First Aid:INHALATION: REMOVE FROM EXPOSURE, RESTORE BREATHING IF
STOPPED. GET MEDICAL AID. EYES: IMMEDIATELY FLUSH WITH PLENTY OF
WATER FOR 15 MINUTES. GET MEDICAL AID. SKIN: WASH THOROUGHLY WITH
SOAP AND WATER . IF IRRITATION DEVELOPS OR PERSISTS, CONSULT WITH A
PHYSICIAN. REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE REUSE.
INGESTION: DO NOT INDUCE VOMITING. GIVE GLASS OF MILK IF CONSCIOUS.
GET MED AID.

Fire Fighting

Flash Point Method:TCC
Flash Point:60.0F,15.6C
Extinguishing Media:CARBON DIOXIDE, FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS VAPORS WHICH MAY FORM EXPLOSIVE MIXTURES IN
AIR OR TRAVEL ALONG GROUND TO IGNITION SOURCE & FLASH BACK.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS. VENTILATE AREA. AVOID CONTACT WITH HOT LIQUID AND
FUMES. CONTAIN AND REMOVE WITH INERT ABSORBENT AND NON-SPARKING
TOOLS. REACTS WITH OXIDIZING M ATERIALS. RQ IS 100 LBS OR MORE.
Neutralizing Agent:NONE

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY, WELL VENTILATED
AREA OR BUILDING WHICHCOMPLIES WITH OSHA 1910.106. KEEP IN A
CLOSED, LABELED CONTAINER. PROTECT FROM DAMAGE.
Other Precautions:KEEP CONTAINERS CLOSED WHEN MATERIAL IS NOT IN USE.
GROUND AND BOND DRUMS. DO NOT USE PRESSURE TO EMPTY DRUMS. KEEP
AWAY FROM HEAT AND OPEN FLAME. DISCARD CONTAMINATED FOOTWEAR. DO
NOT WEAR CONTAMINAT ED CLOTHING. MAINTAIN GOOD HOUSEKEEPING.

Exposure Controls

Respiratory Protection:OUTDOORS: NIOSH APPROVED RESPIRATOR FOR PAINT,
ENAMEL MISTS, & ORGANIC VAPORS. RESTRICTED VENTILATION AREAS:
APPROVED CHEMICAL/MECHANICAL FILTERS DESIGNED TO REMOVE A
COMBINATION OF PARTICULATES & VAP OR. CONFINED AREAS: AIR LINE
RESPIRATOR.
Ventilation:GENERAL/LOCAL EXHAUST VENTILATION TO CONTROL INHALATION
EXPOSURE BELOW PEL. LOCAL REQUIRED FOR ENCLOSED/CONFINED SPACES.
Protective Gloves:HEAVY DUTY NEOPRENE
Eye Protection:SPLASH GOGGLES/SAFETY GLASSES W/SHIELDS
Other Protective Equipment:WEAR INDUSTRIAL-TYPE WORK CLOTHING AND
SAFETY FOOTWEAR. WEAR PROTECTIVE APRONS, COVERALLS, HATS ETC. AS
REQUIRED.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRECTICES AND
RECOMMENDED PROCEDURES. WASH THOROUGHLY BEFORE EATING, DRINKING OR
SMOKING.
Supplemental Safety and Health
DO NOT WEAR CONTACT LENS WITHOUT PROPER EYE PROTECTION WHEN USING THIS
PRODUCT. AIRBORNE PARTICULATE MAY BE GENERATED DURING REMOVAL
OPERATIONS INCLUDING ABRASIVE BLASTING, SANDING OR GRINDING. EMPTY
CONTAINERS MAY CONTAIN PRODUCT RESIDUE INCLUDING FLAMMABLE OR
EXPLOSIVE VAPORS. DO NOT CUT, DRILL, GRIND OR WELD DRUMS.

Chemical Properties

HCC:F2
Vapor Density:>1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY VISCOUS LIQUID WITH A TYPICAL SOLVENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAMES
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE UPON
THERMAL DECOMPOSITION.

Disposal

Waste Disposal Methods:DISPOSE OF IN A MANNER THAT COMPLIES WITH LOCAL,
STATE, AND FEDERAL REGULATIONS. INCINERATE IN APPROVED FACILITY. DO
NOT INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.